ShockDAQ is a control and measure system based on windows 2000/XP OS, the
basic standard configuration is single channel.

The detail configuration:

● One PC (DELL computer, dual core 2G/1G memory/80G/DVD/WinXP);

● One charge accelerometer (DL24100, charge sensitivity 3.0pC/m/s²,frequency range 1
-8000Hz, maximum measuring range is  20000m/s²);

● One charge amplifier with one channel (YE5852A, maximum input charge ±
106pC, sensitivity 0.01-1000mV/PC, maximum output ±10VP, maximum output current ±100mA);

● One data acquisition board with one input channel (9111DG/HR, sampling frequency 110kHz, 12 or 16 bit analog value input resolution, 32 bit PCI bus).

Note: 1) Supply the option of 2 input channels, 4 input channels, 8 input channels data acquisition board.

          2) Capability of connecting all kinds of charge accelerometers and charge amplifiers.

Features:

● Measure range can be set to improve signal sensitivity;

● Auto-adjusting of gain and FIR digital stepless filter;

● Automatically measuring the parameters of shock wave and displaying peak acceleration, pulse width and the change of velocity;

● Capability of single sample and continuous sample;

● It can display and save history and support maximum and minimum statistics;

● Available for DBMS, saving sample data and load parameters automatically, and, saving and redisplaying measure data;

● Sample data can be made into a test report in word format, which can be printed or edited later;

● With allowable error band of GJB150, GJB360A, GB2423, GJB548A, GJB1217 and MIL-STD-810F standards;

● Function of analyzing shock power spectrum and response spectrum (optional).

Specification:

1). ShockDAQ1:
Acceleration Peak: 1～50000 m/s²;          Pulse  Duration: 0.1ms～100ms;

2). ShockDAQ2:
Acceleration Peak: 20000～1000000 m/s²;    Pulse  Duration: 0.01ms～10ms；

General: 

● Power supply: 220V±10%, 50/60Hz

● Temperature: 0-40℃

● Humidity: ≤85% (non-condensing)